The training series Design of Marine Auxiliary Systems covers the main aspects of marine auxiliary systems on board of vessels or offshore platforms. During four modules the participants are given an overview of the main auxiliary systems, their main components, the fundamental working principles and the design aspects & considerations. The theory is practised by means of exercises during the modules. Each module can be followed separately, but combined they provide the participant a complete overview of and the in-depth knowledge required to design all marine auxiliary systems. ‘HVAC and refrigeration’ is the fourth module in the series.
Module 4 ‘HVAC & refrigeration systems’ covers the fundamental working principles as well as design aspects of Heating, Ventilation and Air-Conditioning systems (HVAC) and refrigeration systems’ (required for cooling of air). The first day the theoretical background such as thermodynamics of humid air, Mollier diagram, processes in air handling units and in rooms will be explained. The second day the practical aspects of the design of these systems will be covered, such as complying to the rules & regulations, heat load balance, and design considerations. At the end of this module the participant will be able to design a proper functional layout of these systems and perform the main calculations required for designing a well-functioning system.
- Humid air: composition, thermodynamics, absolute and relative humidity
- Mollier diagram, sensible and latent heat, enthalpy
- Processes in air handling units: filtration, mixing, heating, cooling, (de)humidification
- Processes in rooms: heat, moist, CO2 production and transmission
- Comfort zone
- Design requirements & considerations
- Refrigeration systems
- Lay-out HVAC systems
- Rules concerning HVAC and refrigeration systems
- Main calculations:, humidity from wet and dry measurement, CO2 percentage calculation, basic room process calculation, heat load balance calculations (ISO 7547) and engine room calculation (ISO 8861)
Target group and lecturers
This module is intended for technical personnel who either has to design HVAC and refrigeration systems, or match and integrate these systems with other auxiliary systems. Salesmen, purchasers as well as managers may also benefit of this module.
On the first day the lecturers are professor D. Stapersma MSc and assistant professor P. de Vos MSc of Delft University of Technology, faculty Mechanical, Maritime and Materials Engineering. The lecturers of the second day are P. Voorn MSc and R. Cordier de Croust, who both have extensive experience with the design of HVAC systems and have already given several trainings for the maritime industry.
Together they provide a perfect combination of theoretical background and practical design knowledge.
20 and 21 august 2018
09.00 – 17.00
Netherlands Maritime Technology – Boompjes 40 in Rotterdam, the Netherlands
Members NMT: €1.000,-
Costs include all lecture materials, catering and lunches (excluding 21% VAT).
Design of Marine Auxiliary Systems module 1: Fundamentals Pumps, Compressors and Heat Exchangers
26 and 27 March 2018 in Rotterdam and Capelle aan den IJssel
Design of Marine Auxiliary Systems module 2: Fundamentals Pumps, Compressors and Heat Exchangers
23 and 24 april 2018 in Rotterdam
Design of Marine Auxiliary Systems module 3: System Engineering
28 and 29 May 2018 in Rotterdam
Please contact for more information Jeannette Lucas-Colijn, Event Manager at the NMT office via T +31 (0)88 44 51 043 or E email@example.com.
You will receive a confirmation of participation, including a route description and a list of nearby hotels a few weeks before start of the training.